The visor of a motorcycle is a polycarbonate-based front shield on the helmet, which works with hinges and covers the face to provide protection. Rain-X is a liquid that repels water and makes a coating on plastic visors for better visibility.
Can You Use Rain-X on a Motorcycle Visor? You can use Rain-X on a motorcycle visor because it can prevent scratches, provide more visibility, wind resistance, repel bugs, resist ice foaming, and has anti-fog properties.
Rain-X is ideal for the visors because the plastic material is compatible with this liquid. It is available in plastic, curved bottles with a nozzle and spray pipe.
Why would you use Rain-X on a Motorcycle visor?
It has various benefits for plastic-based surfaces. Due to the following properties, you can use them.
Prevention from scratches
The polycarbonate-based motorcycle visors can undergo more scratches due to stone striking. In addition, dirt and stones can produce several scratches and lines on their surface.
Due to scratches on the top layer, the visibility level decreases. You cannot see through the front shield when it is down on the eyes.
However, the Rain-X makes a specific coating on the upper side. It is a microscopic beaded layer that is not visible through the eyes.
But, the layer spread on their surface evenly. As a result, external things cannot impact the surface.
It reduces the probability of scratches on their surface.
More visibility
Rain-X is a cleaning liquid that improves the visibility of the motorbike visor. Due to its composition, it can repel rainwater and other liquid droplets.
It can clean its surface due to its silicon polymer-based composition. Due to the layer of these hydrophobic polymers, the water droplets cannot accumulate on their surface.
In such circumstances, the water has more pressure, and the liquid turns into tiny droplets. Due to the pressure, these droplets move down the surface.
As a result, they fall off the surface without external force or wiping. In addition, during wet weather riding, the tendency of water droplets increases, which decreases road visibility.
With the droplets on the front shield, you cannot identify the front-coming automobiles. Therefore, it can cause dangerous accidental events.
To avoid these visibility problems, you can utilize Rain-X on its surface and increases its clarity and visibility. Due to its formula and polymer layer, it can repel the droplets of rainwater.
It can clean the helmet shield by removing the water drops. Unlike other cleaning liquids, it provides optimized results and better safety.
Due to more road visibility, riding becomes secure and keeps you safe from accidents.
Resistant to wind
Many people ride their motorcycles in the worst climate situations.
However, the freezing winds can affect the helmet and its visor. Due to wind pressure, tiny stones and straws strike the shield.
They can break the front side of this protective shield. In such circumstances, you cannot see the road and other vehicles which cause crashes.
The layer of Rain-X on its surface can repel the effects of wind. It can repel stones and other things without damaging the top side of the shield.
It is a competitive liquid that makes a protective coating to withstand the worst winds and weather.
Bugs repellent
The bugs and small flying insects can attack the helmet of a motorcyclist. These bugs can stick to the helmet surface and accumulate on the visor.
In such circumstances, they can cause distraction, which leads to a lack of control over the handlebars. Due to negligence, you can lack control over the tires, which results in accidents.
Rain-X is the best choice because it can repel different types of bugs. Due to its coating, the road bugs cannot stick to its surface.
The front shield remains clear, increases visibility, and makes the ride safe.
Resistance to ice foaming
I always use Rain-X on my helmet visor when riding the motorbike in cold weather. It can repel the foaming of ice on its surface because it resists snow.
Due to cleaning characteristics, it can repel and clean the ice beads from plastic or polycarbonate surfaces. As a result, it provides a clear and non-interrupted road view.
During night ridings, the ice foaming increases due to low temperatures. The liquid coating activates and clears the surface from ice foams.
It can repel the accumulation of snow because it can inhibit the view. In such circumstances, you can approach your destination without a sudden crash.
Anti-fog properties
It is a high-quality cleaning liquid and comprises anti-fog properties. It can reduce the fog from the visors of helmets by removing the condensation on the inner side.
The condensation happens due to more humidity, wet riding, and low temperatures. Its new and modified formula has improved from the standard performance.
It provides more protection from fog, which can interfere with road view. In addition, during the humid ridings, it can decrease the condensation level, which can produce inside the shield.
Due to its resistance against fog, it does not allow it to prevail or accumulate on the motorbike helmet visor. It puts pressure on the water drops, which convert into tiny droplets due to thinness.
These droplets cannot stay on the polycarbonate or plastic surface and fall, which cleans it. As a result, it remains free from fog, and you can access the road without interruption.
These are specific products for anti-fog action. You can apply them from the inner side for condensation control and reduction.
What is the method to use Rain-X on a motorcycle visor?
You can apply the Rain-X coating directly on the visor surface without requiring any help.
For its application, you can adjust the helmet on a flat surface and clean it from the external and internal sides.
You can use a dry towel for the cleaning procedure. With the towel, you can remove the moisture from the surface.
The liquid provides performance in all temperature conditions. But, 40°F (4.4°C) is the ideal temperature limit for the optimized efficiency.
You can dampen a non-fibrous duster in the liquid or directly spray it over the shield. Then, you can buff it on the upper side and continue the buffing for 2 to 3 minutes.
For buffing, you can use a dry and fiber-free towel. For the uniform application, you can keep the motions circular and overlap them for a better spread.
Then, you can leave the helmet for automatic drying, which takes less than ten minutes. In a few conditions, the surface becomes hazy.
It happens due to poor cleaning and dirt formation. You can spray the liquid and make another layer for maximum coverage in such circumstances.
What are the disadvantages of using Rain-X on a motorcycle visor?
The plastic-based visors are sensitive to the Rain-X due to their composition. Over time, they can develop a few scratches and thin lines on the outer side.
It happens due to applying the liquid on the already scratched surface. The scratches are tiny, but they can interfere with road visibility.
Also, its application requires proper buffing. You cannot get optimized results due to improper and non-uniformed buffing and application.
It happens when you do not apply a uniform layer through the spray container. Due to incorrect application, you cannot get the desired results despite 2 to 3 coatings.
Sometimes, it can make the plastic flexible, which damages it faster. On old helmets, it has less effect, and you can improve its performance with multiple coatings.
Related Articles:
Why Are Cowboy Boots Not Good For Motorcycle Riding?
Can you convert a carburetor to fuel injection on a motorcycle?