Roads usually become muddy after rain because of a mixture of water and dust. The mud layer on the road surface increases the slipping chances of the car. Moreover, its tires can also get stuck in the mud if it is deep and has a soft consistency.
How To Get a Car Out of Mud With a Truck? You can get the car out of the mud with a truck by selecting a suitable towing vehicle. Position the truck in front of the car and attach tow straps to both vehicles. Clean the surroundings and add gravel, sand, and floor mats for traction. Put the car in neutral, slowly drive the truck forward, and avoid sudden braking.
Pulling your car from the mud yourself is the best option because you do not have to wait for towing companies. You can get assistance from the truck driver to escape the challenging situation.
How do you get the car out of the mud with a truck?
Many people get help from pickup truck drivers to remove their cars that are stuck inside the mud and not coming out. It is better to shift the car to the lowest gears and accelerate slowly.
It reduces the spinning of wheels and allows them to maintain contact with roads.
Select and inspect the towing truck
Selecting a suitable truck when you want to pull the stuck cars with their help is necessary. You cannot tow the cars with all trucks because of the difference in their weight-carrying capacity and delicate components.
You should check the hauling capacity of the towing vehicle because some luxurious cars are heavier than pickups. Checking towing capacity is essential to decrease the risk of damaged components.
It is also better to check the physical signs of damage because you cannot use vehicles with damaged components for towing.
Select towing vehicles with four-wheel drive so their tires maintain stability while hauling heavy loads.
Position the truck
Position the truck after getting information about its towing capacity and ensure that its parts are free from damage.
Position it in front of cars to decrease the risk of damage. In addition, positioning these vehicles at a right angle is necessary for straight-line movement.
It is necessary to ensure that the truck’s rear side bumper faces the front side of the car. Position these vehicles correctly and maintain a significant distance.
Maintenance of safe distance is necessary to reduce the collision risk during the pulling procedure. inside.
Attachment of tow straps
Use tow straps instead of chains to connect these vehicles because these can leave marks on the exterior frame and break easily.
You cannot attach these straps at any point because it can lead to serious damage. It is necessary to get information about attachment points for these straps for safe hooking.
You should not attach the towing straps directly to the bumper, steering parts, suspension components, and hitch balls because these are delicate and vulnerable to damage during heavy hauling.
Some vehicles are equipped with attachment points beneath the rear bumpers, which you can use. Moreover, you can hook the tow traps with recovery points, tow hooks, and trailer hitch.
Clean the surroundings
Remove the dust, debris, and obstacles from the surroundings while doing this procedure. Cleaning surroundings is better so obstructive material does not cause hindrance during the towing procedure.
You can use old branches to remove the debris from the nearby areas. You can collect the larger stones with your hands and put them aside.
Many people prefer to use shovels to dig holes in muddy areas according to the size of the tires. Digging holes around this area allows the stuck tires to move freely.
Clean obstructive material if it is present between the truck and the car.
Put traction aids
It is necessary to put the traction aids near the front tires for smooth movement on hard surfaces. My friend also tried this method because his car does not contain a four-wheel drive feature, which helps maintain the tire grip on the road.
You can use floor mats and plywood boards because these are hard surfaces and increase the friction between the tires, which allows smooth movement.
In addition, you can also use gravel and stones to increase the friction and forward propulsion of wheels. Using cardboard or safety chains can also help you to pull your car.
Put the car in neutral
Open the doors and enter your car after attaching the towing straps and arranging the traction aids on their front side tires.
Turn on the engine using the start and stop buttons or manual keys. Avoid fast acceleration because it can increase the chances of sudden jerks and collisions. In addition, fast acceleration only allows the wheel to spin because of the engine’s power transfer.
Press the accelerator pedal slowly and shift towards the lower gears. Adjust the automatic or manual transmission towards the neutral to minimize the power supply and maximize the traction.
You should not apply brakes while doing this because it can cause the tires to get stuck in the mud again.
Drive the truck
Sit inside the truck and lock the door. Disengage the parking brakes that you have engaged previously for the attachment of tow straps.
Turn on the engine, press the gas pedal, and accelerate slowly. Avoid sudden braking because it can lead to jerky movement, voiding the warranty of their several components.
Slowly move forward and communicate with car drivers to ensure that wheels are moving forward. The engine needs more power to pull the stuck vehicles from the mud.
Things to consider when pulling the car out of mud with a truck
You have to consider different factors while towing the cars with trucks so they cannot damage any components and cause safety issues.
I always use towing straps to pull cars because these are easy to hook. In addition, they make a secure connection with the attachment points.
The risk of their coming off from the attachment point is also low because of their secure hooking. Moreover, chains are not suitable because they are difficult to attach and scrape off the paint layer.
Furthermore, chains cannot bear the heavy hauling and are more vulnerable to breaking. In addition, the length of the tow straps also matters for safe pulling.
Select two straps of suitable length, which is helpful to maintain a significant distance between the two vehicles. Avoid accelerating your cars fast because this causes wheels to spin and lose traction.
Do not apply brakes while doing this procedure because it can damage the exterior components.
Sometimes, you need help from your friends to push the car from behind so it comes out from the mud.
Why do cars get stuck in the mud?
All car models are not equipped with the all-wheel drive that provides traction to tires while moving on muddy, snowy, and rainy roads.
Tires cannot maintain their contact with the road because of the absence of a four-wheel drive feature. In addition, the chances of slipping increase, and they cannot maintain their contact with the road because of the formation of a mud layer between tires and the road surface.
Moreover, spinning wheels dig the mud and make the situation worse. Spinning wheels do not allow propulsive movement because of the smooth surfaces.
Tires need hard surfaces to maintain friction and grip on the road. Wheels and road surfaces become slippery and smooth, leading to loss of traction.
Related Articles:
Why is the Tesla Model 3 cabin overheat protection not working?